Finishing Brush
Operates at up to 500 RPM with a spread width that is a consistent 60” wide and operators can use the adjustable tailgate and ground speed to apply material at depths ranging from 1/64 of an inch up to 1 inch. This option is needed for applying wet or dry materials after aerification or whenever a heavier application is required.

• Weight: 88 lb (40 kg)
• Length 74 in (188 cm)
• Height 16 in (41 cm)
• Width 16 in (41 cm)

Hopper Insert
The QuickPass 450 with the Twin Spinner option was designed for light and frequent topdressing. With the addition of the Hopper Insert Kit, the QuickPass can now also be used for heavier material outputs, while maintaining optimal performance by evenly distributing materials. The Kit is designed to be dropped into the hopper and then simply lifted out when the customer wants to use the QuickPass with the Brush Option.

Hydraulic Power Pack
The self contained 11 HP Hydraulic Power Pack makes the Quick Pass completely self powered and does not require any tow vehicle hydraulics. The Hydraulic Power Pack is equipped with both electric start and manual back up for ease of use and reliability.

• Weight: 210 lb (95 kg)
• Length: 37 in (94 cm)
• Height: 31 in (79 cm)
• Width: 35 in (89 cm)

Fluid Capacity with Optional Power Pack :
8.7 US gal (32.9 l)
Fluid Type: ISO VG-68 fluid

Twin-Spinner
Designed for lightly top dressing�15 to 30 feet wide and provides the high level of productivity needed for frequent applications. The spread pattern can be adjusted to accommodate a wide variety of wet or dry materials allowing customers to establish their own application pattern.

• Weight: 210 lb (95 kg)
• Length 69 in (175 cm)
• Height 35 in (89 cm)
• Width 27 in (69 cm)