Load Capacity
The large 4 yd3 (3.06 m3) capacity hopper and overall design will accommodate any size loader. The large 33", 10 ply turf tires, coupled with our 4 wheel walking beam suspension minimizes ground compaction by evenly spreading the load over all 4 tires while providing optimum maneuverability.
The hopper is designed for fast and efficient unloading of materials (will bulk unload an entire hopper in 45 seconds) with no bridging of materials.

Construction
The MH-400 is all welded steel construction, utilizing an 8 stage pre-treatment and powder coat painting process that ultimately provides a finish that has a higher resistance to impacts and chipping and increased UV protection for resistance to fading and corrosion. This process includes a 5 stage dip tank process and a 3 stage application and finishing process.

The main conveyor belt is one piece Vulcanized rubber, no seams or staples to come apart. The load bearing support rollers have triple sealed bearings for enhanced reliability and long life. The drive roller has a large diameter main shaft that is supported by fully adjustable pillow block bearings. The belt is also smooth so that we can effectively seal the sides from material dribbling out.

The hopper lift cylinders are inverted so that no sand or foreign materials can damage the shafts or seals.

Versatility
The MH-400 can be used with or without options for a multitude of tasks everyday at your facility. Including, but not limited to; moving materials around your course (will unload a complete hopper in 45 seconds), filling smaller machines while on the course (therefore eliminating travel time), raise the rear of the MH-400 to fill the hopper of the TYCROP ProPass 180, while on the course and you have a top dressing team that's unstoppable!

With the Swivel Kit and Cross Conveyor installed you can do everything from bunker and greens renovations to cart path rebuilding to back filling drainage ditches and more. Install the Twin Spinners and the MH-400 becomes a large area top dresser.

The rear discharge height is completely variable, up to 72", to aid in placing materials right where you need them and increasing operator comfort .
The rear hitch receiver allows Superintendents to tow implements in tandem (ie. wood chipper).

Controls
The Standard version (Standard Hydraulics) has the control leavers mounted at the side of the machine and comes with a remote two way switch which controls the main conveyor belt. The two way switch can be used from the cab of the tractor or anywhere around the machine.

The Wireless version gives you versatility like never before. Now you can adjust the unit in real-time as it operates. Plus you can store your settings in the programmable controller as well as make quick settings changes at any time.

The WIRELESS controller is fitted with a magnetic sleeve and comes with a variety of adaptor plates to stick it to any vehicle configuration. Plus you can slap it onto the fender or the hopper as you make adjustments instead of laying it on the ground!

Adjustable Tailgate
The tailgate of the MH-400 is completely adjustable and entirely removable. You can unlock the spring-loaded latches and let the tailgate float wide open for bulk unloading or you can completely remove the tailgate for moving of even larger materials.
With the tailgate locked you can adjust the bottom six inches to precisely meter materials during applications when the options are attached.

Universal Quick Attach Mounting Brackets
The Quick Attach Mounting Brackets allow you to install and remove all the options, the Cross Conveyor, Swivel Kit, or the Twin Spinner in only a few seconds – No Tools Required. The Swivel Kit has its own set of Quick Attach Mounting Brackets for connecting the Cross Conveyor Option.